Cost guide
How much does a well cost in Montana?
Real ranges from state well records and valley drilling rates, checked November 2026.
Short answer: most finished residential wells in Montana land somewhere between about $6,700 and $43,900, with a midpoint near $21,900 across tens of thousands of state well records. Drilling itself in the Gallatin Valley commonly runs $28 to $45 per foot. Where your well lands in that range comes down to depth, rock, and access.
| Piece of the job | Typical range |
|---|---|
| Drilling, per foot | $28 to $45 |
| Finished well, low end (shallow, easy access) | About $6,700 |
| Finished well, midpoint | About $21,900 |
| Finished well, high end (deep, hard rock) | Up to $43,900 |
What moves the price
- Depth. The biggest lever. A 150-foot well and a 400-foot well are different jobs wearing the same name.
- Rock. Valley gravel drills faster than bedrock. Hard rock costs more per foot and wears tooling.
- Access and season. A rig needs to reach the site. Mud season and steep lots add cost or delay.
- Pump and pressure system. The well is the hole. The pump, tank, and controls that make it a water system are their own line items.
- Yield trouble. Dry or low-yield first holes happen. Ask each driller how they price that risk before anyone drills.
The only number that counts
Guides like this one set expectations. They do not price your parcel. Drillers estimate depth from state well logs near your land, then price the real job. Two or three quotes on the same parcel will tell you more than any guide, including this one.
Ranges drawn from published Montana well cost data (state well-completion records) and valley drilling rates, checked November 2026.
Get the number for your parcel.
Free quotes from licensed drillers who will read the well logs near your land and price the real job.